Blog Archives

Design of a FPGA PCB including USB2.0 interface and two 80 MHz ADCs

This is my most advanced homemade PCB design until now. The PCB contains a EP3C5E144C8N Cyclone III FPGA from ALTERA, two 8 bit ADCs AD9057 from Analog Devices @ 80 MHz, a FTDI USB2.0 controller and many other things. The

Tagged with: , , , , , , , , , , , , , , , , , , , , , ,
Posted in Uncategorized

FTDI FT232H USB 2.0 FPGA extension for the Altera DE0

This is a PCB design using the USB 2.0 IC from FTDI, FT232H – Hi-Speed Single Channel USB UART/FIFO IC, to connect it to the GPIO port of the Altera DE0 development board. The design should also work with other

Tagged with: , , , , , , , , ,
Posted in Uncategorized

ADC readout and USB2.0 data transfer with an FPGA

Recently I bought the Altera DE0 Development and Education FPGA board from Terasic. This is a project giving the development board a fast USB2.0 interface. As an USB 2.0 controller the FT232H Single Channel Hi-Speed USB to Multipurpose UART/FIFO IC

Tagged with: , , , , , , , , , , , , , ,
Posted in Uncategorized